Common Applications of Fluids

Fluids are used in a wide range of applications, often playing a vital role, without which, these applications will just cease to exist. The important thing to note is that most of the crucial applications of fluids are for generation of electricity or power. In hydroelectric power plants and automobiles, fluids are directly used to generate power or electricity. In thermal and nuclear power plants, fluids are indirectly used for generation of power, and still they are the dominant parts of these applications. It is not an overstatement to say that without fluids, the progress of the human race would stop. Some of the major applications are:

1) Hydroelectric Power Plants

In hydroelectric power plants, water is used to generate electricity on a large-scale basis. Water stored in the dam possesses potential energy, which is converted into the electrical energy in the power generation unit of the plant. Hydroelectric power plants are one of the major suppliers of power throughout the world. In some countries power requirements are fulfilled entirely by these plants. The discharged water from dams can be used for irrigation purpose also.

2) Hydraulic machines

Machines that operate on a fluid like water and oil are called hydraulic machines. The fluid has the capacity to lift heavy loads and exert extremely high pressures. Some hydraulic machines are used to perform various machining operations. In most of these machines, oil is used as the fluid. The oil is passed through the hydraulic motor which transfers large amounts of energy to the fluid. This high energy fluid enters the piston and cylinder arrangement where it can be used to lift heavy loads or apply large forces.

3) Automobiles

No automobile can run without fluid. Fluids perform three crucial operations in automobiles: generation of power, lubrication and cooling of the engine. Petrol or diesel generates provide power to combustion in the engine. This is commonly referred to as fuel. Oil is used for the lubrication of the engine and the gearbox and also various other moving parts of the vehicle. In larger automobiles like cars, busses and trucks, water is used for cooling the engine.

4) Refrigerators and Air Conditioners

This is another important area where fluids play a crucial role. In refrigerators and air-conditioners, the fluids are known as refrigerants. The refrigerant absorbs the heat from whatever is being kept in the chiller or evaporator, which is at a low temperature, and delivers that heat to the atmosphere, which is at a high temperature. In air conditioners, the refrigerant absorbs room heat and throws it in to the atmosphere, thereby keeping the room cool. The entire operation of refrigerators and air-conditioners depends on the use of a refrigerant.

5) Thermal Power Plants

In thermal power plants, water is used as the working fluid. After getting heated in a boiler, water is converted into superheated steam which is passes through the blades of turbines, thus rotating them. The shaft of the turbine rotates in the generator, where electricity is produced. Thermal power plants are one of the major suppliers of power in various parts of the world, and water working as the fluid is their most important component.

6) Nuclear power plants

Water is again a crucial power plant component. Here it is both the working fluid and a coolant. In some nuclear power plants, heat produced within the nuclear reactor is used to directly heat water, which is converted into steam. This steam is passed through the turbines similar to thermal power plants, rotating turbine blades to generate power. This is an application of water as the working fluid.

In other nuclear power plants, the heat from nuclear reactors is not used to generate steam directly. Heat is first used to heat the water, which acts as the coolant. This coolant then transfers the heat to a secondary coolant or the working fluid, which is again water and it is passed through the turbine to generate electricity.

7) Fluids as a Renewable Energy Source

There are number of fluids that are being used as a renewable energy source. Air or wind is one of the most popular sources of renewable energy. Wind is used for generation of electricity on a small as well as large scale basis. Water is used in tidal power plants to generate electricity on a small scale basis. Ocean waves are used to rotate turbine blades within the power generation unit. Bio diesel, a type of the vegetable oil, is used as a fuel for vehicles along with traditional diesel.

8) Operating Various Instruments

Compressed air is used for the operation of various types of instruments and automatic valves. These valves can be activated and deactivated by applying the pressure of compressed air. The pneumatic tools which work on compressed air are used for various applications like grinding, screwing and unscrewing various machinery parts etc.